Summer has arrived, what should be done to insulate your factory building?

The characteristics of steel structure factory buildings are large area, high height, and easy heat conduction of metal structures, making it difficult to cool down.

Factory buildings insulation board

Applicable insulation methods include:
1. Heat dissipation and ventilation
The rapid flow of air can transfer heat to the outside of the workshop, causing the temperature inside the workshop to be lower than outside. Some industries with low requirements for processing environments are very suitable. Setting up more doors and windows to allow air circulation will make it cooler.
2. Installation of cooling equipment
Install environmentally friendly air conditioning to cool down, and fresh outdoor air flows through wet curtains while absorbing the heat of the air. Achieve cooling, air exchange, dust removal, and improve the oxygen content of the workshop air. Suitable for spaces with dense workers and high levels of dust.
3. Use insulation materials
By using insulation materials, the temperature in the workshop can be reduced by 5-12 degrees Celsius. Phenolic foam insulation board is the material with the same thickness and good thermal insulation and fireproof performance. Phenolic insulation board with different covering materials and thickness can be selected according to the environment and budget.

Aluminum foil phenolic insulation board, with aluminum foil covering effectively resisting heat source radiation and blocking heat transfer, has low thermal conductivity and good insulation effect.Phenolic foam insulation board is a closed cell foam structure, which is equivalent to a small vacuum. It is applicable to the external wall and ceiling of the plant, which can effectively isolate cold and hot air, prevent water and moisture, and effectively alleviate the indoor stuffy and humid conditions.


Post time: Jun-05-2023